Advertisement
Quick Links
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
OFFICE: 732-752-7220
CUSTOMER SERVICE: 732-366-1788
Read all instructions before assembling crib.
Save instructions for future use.
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed are step by step instructions to help you.
quickly assemble your product.Before you begin we recommend
that you follow the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver Hammer
Do Not Use Power Drills or Drivers
parts during assembly please place them on a soft
To protect
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
ASSEMBLY INSTRUCTIONS
s
1
ITEM NO: 665
Advertisement
Related Manuals for Dream On Me 665
Summary of Contents for Dream On Me 665
- Page 1 Dream On Me Inc. ASSEMBLY INSTRUCTIONS ITEM NO: 665 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 OFFICE: 732-752-7220 CUSTOMER SERVICE: 732-366-1788 Read all instructions before assembling crib. Save instructions for future use. Adult assembly required. Small parts may present choking hazard prior to assembly.
- Page 3 . Never use this product if there are any loose or missing fasteners, loose joints,broken parts, or torn mesh/fabric. check before assembly and periodically during use. Contact DREAM ON ME for replacement parts and instructional literature if needed. . Never substitute parts, the product including side rails, must be fully erected prior to use.
-
Page 6: Connection Hardware
CONNECTION HARDWARE d: 1/4”x1-3/8” Allen head bolt (3 pcs) a : 1/4”x3” Allen head bolt (14 pcs) b: Barrel nuts (14 pcs) c: Wood dowels (18 pcs) 14 pcs) 14 pcs) 3/8” h:Washer (2pcs) e : 1/4”x2” Allen head bolt (16 pcs) f: 1/4”x3/4”... - Page 7 Changer shelf (1pcs) Back top rail (1pc) Back bottom rail (1pc) Back bottom rail (1pc) Back top rail (1pc) Changer shelf (2pcs) Metal spring support platform (1pc) Pad (1pc) The bottom bar(1pc) Front rail (1pc) Back right leg (1pc) Back left leg (1pc) Back right leg (1pc) Back left leg (1pc)
- Page 8 CRIB ASSEMBLY STEP 1 Use allen wrench(g) to connect bolts. changer longer top rail (D), Connect changer longer middle rail 1(E1), and changer longer bottom rail (E2) to changer back leg (B1) and changer front leg (B2) by using wood dowel (e1), barrel nut (d) and 3”bolt (b).
- Page 9 STEP 3 To assemble part C to the assembled part in Step 2 by using the same way as step 1. CHANGER...
- Page 10 CRIB ASSEMBLY STEP 4 To attach back bottom rail(H) and back right leg(P) & back left leg(Q) by using Allen head bolt (a). To attach back top rail(G) and back bottom rail(H) by using Allen head bolt(a),(m). STEP 5 Attach Left head board (A) to the back left leg (Q) using Allen head bolt (n) and barrel nuts (b).
- Page 11 STEP 6 Attach The left changer side (B) to the back right leg (P) using bolts(d) and allen wrench (g). Model shown is example only. Styles may vary . STEP 7 Locate the mattress support (L) with tabs. Be sure the smooth side of the mattress support (L) is faced upward.
- Page 12 STEP 8 Attach the front rail (N) and the bottom bar (K) to the left changer side (B) and the left head board (A) using wood dowels (c),bolts (a),barrel nuts (b) and allen wrench (g). Attach the front rail (N) and the bottom bar (K) to the left changer side (B) and the left head board (A) using wood dowels (c),bolts (a),barrel nuts (b)
- Page 13 STEP 9 1.Assembly the Belt (j) to the changer side (B&C) using washer (h) and screw (i). 2.Add the pad (M) . 3.Put the child on the pad,then insert safty restrain system of the tape across child's waist. The tightness can be adjusted by increasing the tension of the tape. longer belt shorter belt Note:...
- Page 14 Converting crib to a toddler bed (toddler rail and converting bolts are sold separately) Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a requirement by law under CPSC And ASTM. We do apologize for any inconvenience this may cause you.
- Page 15 （LIT ENFANT RAIL EST VENDU SEPAREMENT）...
- Page 16 Converting crib to a day bed You have the option to convert crib to a day bed 1:Remove the front rail (N) 2:Install the mattress support (L) in its lowest position. Converting crib to a full size bed I (Hollywood bed frame sold separately) Conversion kit is sold separately You have the option to convert crib to a full size bed I 1:Use the front rail as the footboard of full size bed I...
- Page 17 Converting crib to a full size bed II (Hollywood bed frame sold separately) PARTS REQUIRED TO COMPLETE STEP LEFT FOOT PLATFORM RIGHT FOOT PLATFORM POST x 1 RAIL POST x 1 POST x 1 NOT INCLUDED NOT INCLUDED NOT INCLUDED Converting kit is sold separately You have the option to convert crib to a full size bed II 1:Use the back rail as the headboard of full size bed.
- Page 18 FURNITURE TIPPING DETERRENT HARDWARE HOW TO LOCK Tipping furniture may injure young children. Use of this tipping restraint hardware is highly recommended. When properly instated this hardware could provide protection against the unexpected tipping of furniture due to improper use. WARNING This hardware is only a deterrent.Adult supervision is the only proper deterrent to prevent improper use of any potentially hazardous product.
-
Page 20: Limited Warranty
LIMITED WARRANTY Dream on Me warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 30 days from the date of original purchase. This warranty is valid only upon presentation of proof of purchase.
Need help?
Do you have a question about the 665 and is the answer not in the manual?
Questions and answers