Zhone SkyZhone 1624 Hardware Installation Manual page 35

Figure 15: Mounting Bracket with screw locations
6
Attach the mounting bracket and the base to the wall
base has an UP arrow cut into the plastic casing to ensure in proper
orientation.) Use a 1/4 inch drill masonry bit to install a 1 inch plastic
insert to secure the cover and the aluminum frame to the concrete wall
with the appropriate screws.
Figure 16: Bracket and Base
7 Attach the protective cover to the base
(concrete) wall. Note that the cover should be attached so that the
top contains the two cutouts for the angled antennas.
Mounting the SkyZhone to the side of a building
and then attach the base to the
SkyZhone 1624, 1424, 1224 Hardware Installation Guide
(Figure 16). (The
35