Table of Contents
Advertisement
The SkyZhone access point
Line power
SHDSL.bis line card
Cables
16
SkyZhone 1624, 1424, 1224 Hardware Installation Guide
The SkyZhone access point is powered by a SkyZhone aggregator over the
SHDSL link. There are four pairs of twisted wires on the uplink interface that
are capable of delivering power to the unit in addition to carrying the SHDSL
signals. Two powered pairs are required with the other two for longer loops.
The wiring diagram below illustrates the wiring connections for power and
data being transmitted over the same pair of wires..
Figure 4: SHDSL backhaul with span powering
External Power Shelf
The SkyZhone access point supports power and data on the same wires.
Delivering power and data over the same wires
Note: For more information about the hardware required to deliver
power and data over the same wires, contact your Zhone sales
representative.
The SkyZhone Port Connectors
The port connectors are located on either side of the SkyZhone unit.
shows the SkyZhone access point port locations.
Figure 5
Advertisement
Table of Contents
