Ricoh D027 Service Manual page 73

SC Tables
No. Type
1.
2.
No. Type
Software continuity error
The software has attempted to perform an unexpected operation.
However, unlike SC 990, the object of the error is continuity of the
CTL
software.
991
C
1.
No. Type
Undefined error
CTL
992
Defective software program
D
No. Type
994 CTL Operation panel management records exceeded
C
An error occurred because the number of records exceeded the limit for
images managed in the service layer of the firmware. This can occur if
there if there are too many application screens open on the operation
D027/D029 APPENDICES
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Defective controller
Software error
Turn the main switch off and on.
Reinstall the controller and/or engine main firmware.
See Note 1 at the end of the SC table.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Software program error
Internal parameter incorrect, insufficient working memory.
This SC is not displayed on the LCD (logging only).
Details (Symptom, Possible Cause, Troubleshooting Procedures)
An error undetectable by any other SC code occurred
Details (Symptom, Possible Cause, Troubleshooting Procedures)
3-76 SM