SC Tables
No.
Type
Log Data Error
CTL
An error was detected in the handling of the log data at power on or
876
D
during machine operation. This can be caused by switching the
machine off while it is operating.
Log Data Error 1
-001
1.
Log Data Error 2
-002
1.
1.
Log Data Error 3
-003
1.
2.
Log Data Error 4
-004
1.
Log Data Error 5
-005
1.
2.
-099
Log Data Error 99
D027/D029 APPENDICES
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Damaged log data file in the HDD
Initialize the HDD with SP5832-004.
An encryption module not installed
Disable the log encryption setting with SP9730-004 ("0" is off.)
Install the DESS module.
Invalid log encryption key due to defective NVRAM data
Initialize the HDD with SP5832-004.
Disable the log encryption setting with SP9730-004 ("0" is off.)
Unusual log encryption function due to defective NVRAM data
Initialize the HDD with SP5832-004.
Installed NVRAM or HDD which is used in another machine
Reinstall the previous NVRAM or HDD.
Initialize the HDD with SP5832-004.
3-72
SM