Philips GC650 SERIES User Manual page 3

Problem Possible cause
The iron is not hot
enough and/or the
drip-stop function
has been activated.
The iron You have used
does not the steam boost
produce function too often
a steam within a short
boost. period.
The iron is not hot
enough.
Water You have not
droplets closed the cap
drip onto of the filling
the fabric opening properly.
during
ironing.
You have used
the steam boost
function at a
temperature
setting below 3.
3
Solution
Set an ironing
temperature that is
suitable for steam
ironing ( 3). Put
the iron on its heel
and wait until the
temperature-ready
light has gone out
before you start
ironing.
Continue ironing in
horizontal position
and wait a while
before you use
the steam boost
function again.
Set an ironing
temperature at
which the steam
boost function can
be used ( 3).
Put the iron on its
heel and wait until
the temperature-
ready light has gone
out before you use
the steam boost
function.
Press the cap until
you hear a click.
Set an ironing
temperature that is
suitable for steam
ironing ( 3).
4239.000.6131.4