Vertex Standard VZ-30-G6-4 User Manual page 18

1. Power/Volume Switch
Rotate clockwise to switch power On or to increase the
audio output; Rotate counter-clockwise to switch power Off
or to reduce the audio output level.
2. Tuning Control
To select an operating frequency, channel or others.
3. Antenna
Rubber antenna using for receiving or transmitting a signal.
4. Hand Strap Hook
The loop on the top of transceiver, it is facilitated to
carrying the transceiver.
5. TX/RX Indicator
Light green while receiving a signal or when the squelch is
open; Lights red while transmitting.
6. Speaker
Output the audio.
7. Internal Microphone
Input the audio signal while you talk.
8. PTT Switch
Push and hold to transmit; Release to receive.
9. Programming Key(P1)
The default setting of short key is TX Power Change.
Short press this key to change output power between high
and low level.
10.Programming Key(P2)
The default setting of short key is Scan. Short press this
key to scan current channels or frequency.
14