Preparation; Charging The Battery Pack - Vertex Standard VZ-30-G6-4 User Manual

Frequency:400-470mhz
Table of Contents

Advertisement

PREPARATION

Charging the Battery Pack

1. Using the Battery Pack.
The battery pack is not charged at the factory, please charge
it before use. To extend the battery pack lifetime, please
power off the transceiver and remove the battery pack when
not in use and leave the battery in hot or cold place.
2. Battery Pack Characteristics.
The battery will slowly wear out even not in use. After
charging and recharging, it's normal that the talk and standby
times are noticeably shorter than normal times. If leaving the
battery in very hot place or conditions, it will reduce the
capacity and lifetime of the battery. Overcharging may also
shorten its lifetime.
3. Charging the Battery Pack.
Please charge your battery only with approved
charger. Initially charging the battery pack after
purchase or extended storage (greater than 2 months) will
not bring the battery pack to its normal operating capacity.
After repeating the charge/discharge cycle two or three times,
the operating capacity will increase to normal level.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents