DSP-FTA420/30/40
Users Manual
Autotest Results for Loopback Mode
This section describes the Autotest results for Loopback Mode. The
descriptions of loss, length, and propagation delay tests also apply to Single
Tests using Loopback Mode.
To see the complete results for a test, press ! View Result on the first
Autotest display, use D to highlight the desired test, then press E.
Pass/Fail and Headroom Results for Loopback Mode
The pass/fail result shown on the first Autotest display tells you if the fiber link
tested within the limits of the selected test standard. Headroom indicates how
much more loss you could have in the link without exceeding the limits of the
selected test standard.
Loss Results for Loopback Mode
Table 4 describes the loss results for Loopback Mode.
26