Table of Contents
Advertisement
Quick Links
PC-SDD64V, 128V, 192V,
320V, 500V, 1000V, 2000V
Thank you for purchasing the CONTEC PC-SDDxV. Please use this product in
accordance with the procedures described in this document.
Caution
-Use only the mounting screws (M3 x 6) provided with the product. Longer screws
may damage the interior of the product.
About the PC-SDDxV
-This product is a silicon disk drive interchangeable with a
2.5-inch IDE hard disks.
-This product provides exceptional robustness against environmental factors such as
vibration and shock, and is suitable for factory automation applications where high
reliability is required.
-Low consumption electric power.
-Exceptionally quiet operation, without the motor noise of a hard disk drive.
-According to the ware leveling function (flash life span stretching) ), the rewriting
average life spans are about the maximum 1.8 times in our company so far
compared with the product. (Differ depending on the use condition)
Product Configuration
-PC-SDDxV...1
-User's Guide (this booklet)...1
- Mounting screws...1 set (M3 x 6 4pcs., M3 nylon washers 4pcs.)
- Jumper...1
1
2.5 inch Silicon Disk Drive
User's Guide
CONTEC CO.,LTD.
PC-SDD V Series
Advertisement
Table of Contents
Related Manuals for Contec PC-SDD64V
Summary of Contents for Contec PC-SDD64V
-
Page 1: Product Configuration
320V, 500V, 1000V, 2000V User’s Guide CONTEC CO.,LTD. Thank you for purchasing the CONTEC PC-SDDxV. Please use this product in accordance with the procedures described in this document. Caution -Use only the mounting screws (M3 x 6) provided with the product. Longer screws may damage the interior of the product. -
Page 2: Hardware Specifications
PC-SDD V Series User’s Guide Hardware Specifications Hardware Specifications Model PC-SDD64V PC-SDD128V PC-SDD192V PC-SDD320V PC-SDD500V PC-SDD1000V PC-SDD2000V Format capacity 64MB 128MB 192MB 320MB 512MB 1024MB 2048MB Bus specification ATA (IDE-AT) Transfer rate ATA bus transfer rate 8.0Mbyte/sec(reading / writing) Memory transfer rate (Reading) 5.0Mbyte/sec... - Page 3 LBA mode is set. Note that the product may also be used in LBA mode if AUTO is set. IDE Parameters in NOMAL Mode Products Mode Size (MB) Cylinder Head Sector PC-SDD64V NORMAL PC-SDD128V NORMAL PC-SDD192V NORMAL PC-SDD320V NORMAL PC-SDD500V...
-
Page 4: Connector Pin Assignment
PC-SDD V Series User’s Guide Connector Pin Assignment Signal Function Signal Function RESET- Bus Reset Ground Data Bus Bit7 Data Bus Bit8 Data Bus Bit6 Data Bus Bit9 Data Bus Bit 5 DB10 Data Bus Bit 10 Data Bus Bit4 DB11 Data Bus Bit11 Data Bus Bit3... - Page 5 Mean time before failure for write access [Hours]= Number of writes per hour Ex. 1) If a 9.6-megabyte file is updated once per five minutes on the PC-SDD64V: Average number of writes before failure [No. of accesses] = 22,047,597 Mean time before failure for write access [Hours] = 22,047,597/12 = 1,837,300 (= about 209 years) Ex.
- Page 6 No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this document. The information in this document is subject to change without notice.
-
Page 7: Limited One-Year Warranty
PC-SDD V Series User’s Guide Limited One-Year Warranty CONTEC Interface boards are warranted by CONTEC CO., LTD to be free from defects in material and workmanship for up to one year from the date of purchase by the original purchaser. - Page 8 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan Japanese http://www.contec.co.jp/ English http://www.contec.com/ Chinese http://www.contec.com.cn/ No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. [06222004] [09122002] Management No. A-46-671 [06222004_rev3] Parts No. LYBV281...