Contec PC-HDD40G User Manual

PC-HDD40G User's Guide
Thank you for purchasing the CONTEC PC-HDD40G. Please use
this product in accordance with the procedures described in this
document.

General Caution

- Do not apply pressing force on the top of cover (See Figure 1. on
page 2).
- Do not cover the breathing hole on the top cover (See Figure 2. on
page 2).
- Do not touch the interface connector pins and the surface of printed
circuit board.
- Hard disk are precision instruments. Be extremely careful in
handling during and after assembly.
- The drive can be easily damaged by shocks or ESD (Electrical
Static Discharge), so any damages applied to the drive after taking
out from shipping package and opening ESD protective bag are
user's responsibilities.
- Be sure to turn off the power of the unit when plugging in or
unplugging connectors.
- Use the mounting screws (M3x5 with sw, w : for screwing the base)
provided with the product. Longer screws may damage the interior
of the product.
- CONTEC bears absolutely no responsibility for use if modified hard
disk.
- This hard disk drive (HDD) has not guaranteed use by continuation
operation and continuation power for 24 hours. When it is used by
continuation operation and continuation power a life fails extremely.
In the case of a 24-hours operation system, use of our company
silicon disk drive is recommended.
-
The life of a hard disk drive changes with environment or operating
conditions. As a standard, power time (motor-on time) below
333hours/month (below 11 hours/day), disk access time is 20% or less, it
becomes which for 20,000 hours (power time) or five years, or an early
thing.
1
2.5 inch Hard Disk Drive
CONTEC CO.,LTD.
PC-HDD40G