Download Print this page

Contec PC-ESD-A Series User Manual

2.5 inch silicon disk drive

Advertisement

Quick Links

PC-ESD500-A, PC-ESD1000-A, PC-ESD2000-A,
PC-ESD4000-A, PC-ESD8000-A
Thank you for purchasing the CONTEC PC-ESD-A Series. This product is a silicon disk drive
interchangeable with a 2.5-inch IDE hard disks. Please use this product in accordance with the
procedures described in this document.
The product consists of the items listed below. Check, with the following list, that your package is
complete. If you discover damaged or missing items, contact your retailer.
Product Configuration
-
...1
Product
-
User's Guide (this booklet) ...1
-
Mounting Screws...1 set (M3 x 6mm, M3 nylon washers 4pcs)
-
Jumper ...1
-
Warranty Certificate ...1
-
Serial Number Label ...1
Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and
municipal ordinances.
Features
-
Containing no rotating or moving part as in hard disk drives, thus best suited for applications which
require high environmental resistance (to temperature, humidity, vibration, shock) and for
continuous operation for extended periods of time.
-
Never making any sound such as motor rotation sound or access noise during seeking, thus best
suited for applications which require complete silence.
-
Lower in power consumption than hard disk drives
-
The product comes with a protective function that minimizes disk failures during an instantaneous
stop. *1
*1 This function is not designed to protect files (or data) written onto the disk.
FCC PART15 Class A Notice
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference at his own expense.
WARNING TO USER
Change or modifications not expressly approved the manufacturer can void the user's authority to
operate this equipment.
1
2.5 inch Silicon Disk Drive
User's Guide
CONTEC CO., LTD.
PC-ESD-A Series

Advertisement

loading
Need help?

Need help?

Do you have a question about the PC-ESD-A Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Contec PC-ESD-A Series

  • Page 1 User’s Guide CONTEC CO., LTD. Thank you for purchasing the CONTEC PC-ESD-A Series. This product is a silicon disk drive interchangeable with a 2.5-inch IDE hard disks. Please use this product in accordance with the procedures described in this document.
  • Page 2 PC-ESD-A Series User’s Guide Hardware Specifications Specifications Item PC-ESD500-A PC-ESD1000-A PC-ESD2000-A PC-ESD4000-A PC-ESD8000-A Memory 480MB 960MB 1920MB 3840MB 7680MB capacity 479MB 959MB 1919MB 3839MB 7679MB Bus interface ATA (IDE-AT 44 pin) 40MByte/sec (Read) ATA interface transfer rate *1 15MByte/sec (Write)
  • Page 3 PC-ESD-A Series User’s Guide Connector Pin Assignment Signal Function Signal Function RESET- Bus Reset Signal Ground Data Bus Bit 7 Data Bus Bit 8 Data Bus Bit 6 Data Bus Bit 9 Data Bus Bit 5 DB10 Data Bus Bit 10...
  • Page 4 All relevant issues have been considered in the preparation of this document. Should you notice an omission or any questionable item in this document, contact your retailer. Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may appear in this document or for any results of using the product.

This manual is also suitable for:

Pc-esd500-aPc-esd1000-aPc-esd2000-aPc-esd4000-aPc-esd8000-a