Subaru EyeSight Owner's Manual page 93

Customizing functions
●
Warning Volume setting
The volume can be set to Max/Mid/Min.
When on the Warning Volume settings screen, if the volume is selected with the
switch, 3 short beeps will sound.
●
Lead Vehicle Acquisition Sound setting
The Lead Vehicle Acquisition Sound setting can be activated (ON) or deactivated (OFF).
●
Lead Vehicle Moving Monitor Function
The Lead Vehicle Start Alert function setting can be activated (ON) or deactivated (OFF).
●
The Cruise Control Acceleration Characteristics of the Adaptive Cruise
Control system can be set to one of four levels.
Lv. 4 (Dynamic): Mode used when powerful acceleration is required.
Lv. 3 (Standard): Mode used when performing frequent following, with a following function
that focuses on the speed of the vehicle ahead.
Lv. 2 (Comfort): Mode used when performing following with smooth movement.
Lv. 1 (Eco): Mode that focuses on fuel economy over following the vehicle ahead, it is used
when performing following with smooth movement.
When "Return" is selected, the system will return to the screen 1 level above
the current one.
●
Canceling the custom functions
In the following cases, the custom functions will be canceled and the "Change settings"
screen will be displayed.
• When you pull and hold the
• When the engine is turned off
• When the switch is not operated for approximately 30 seconds
92
NOTE
(Info)/SET switch toward you
/