Table of Contents
Advertisement
Running-in: 6
Catalytic Converter: NO
OPERATING YOUR VEHICLE
Pedal
Manual transaxle
EXAMPLE
(1)
(2)
Automatic transaxle/Auto gear shift
EXAMPLE
(2)
Clutch Pedal (1)
(For manual transaxle)
The clutch pedal is used to disengage the
drive to the wheels when starting the
engine, stopping, or shifting the gearshift
lever. Depressing the pedal disengages
the clutch.
3-9
WARNING
Do not drive with your foot resting on
the clutch pedal. It could result in
excessive clutch wear, clutch dam-
age, or unexpected loss of engine
braking.
NOTICE
Do not pump the clutch pedal repeat-
(3)
edly. It may result in pressure built up
in the clutch circuit and damage to
80J2121
the clutch system.
Brake Pedal (2)
Your MARUTI SUZUKI vehicle is equipped
with front and rear drum brakes. Depress-
ing the brake pedal applies both sets of
brakes.
You may hear occasional brake squeal
when you apply the brakes. This is a nor-
mal condition caused by environmental
(3)
factors such as cold, wet, snow, etc.
80J2122
WARNING
If brake squeal is excessive and
occurs each time the brakes are
applied, you should have the brakes
checked by your MARUTI SUZUKI
dealer.
WARNING
Do not "ride" the brakes by applying
them continuously or resting your
foot on the pedal. This will result in
overheating of the brakes which
could cause unpredictable braking
action, longer stopping distances, or
permanent brake damage.
Accelerator Pedal (3)
This pedal controls the speed of the
engine. Depressing the accelerator pedal
increases power output and speed.
74LH0-74E
Advertisement
Table of Contents
