Other General Lights; Bulb Holder; Front Turn Signal Light (1); Front Fog Light (If Equipped) - Suzuki Swift 2015 Owner's Manual

Fuses: 7

Other General Lights

Bulb holder

EXAMPLE
(2)
(1)
(2)
(1)
(1) Removal
(2) Installation
To remove a bulb holder from a light hous-
ing, turn the holder counterclockwise and
pull it out. To install the holder, push the
holder in and turn it clockwise.
Bulb
EXAMPLE
(1)
(3)
(4)
(2)
(3) Removal
(4) Installation
There are two types of bulb, "Full glass
type" (1) and "Glass/metal type" (2).
To remove and install a full glass type bulb
(1), simply pull out or push in the bulb.
To remove a glass metal type bulb (2) from
a bulb holder, push in the bulb and turn it
counterclockwise. To install a new bulb,
push it in and turn it clockwise.
You can access the individual bulb or bulb
holders as follows.
54G123

Front turn signal light (1)

Front position light (2)

Front fog light (if equipped)

1) Start the engine. Turn the steering
wheel to the opposite side of the replac-
ing fog light to replace the bulb easily.
54G124
Then turn off the engine.
INSPECTION AND MAINTENANCE
2) Insert a flat blade screwdriver into the
hole (2) and remove the clips (1) by
twist the driver as shown in the illustra-
tion.
68LM714
3) Open the fender cover. Disconnect the
coupler with pushing the lock release.
Turn the bulb holder counterclockwise
and remove it.
EXAMPLE
68LM715
EXAMPLE
80JM071
7-26
74LH0-74E