Basic Operations; Adjusting Bass/Treble/Balance /Fader - Suzuki Swift 2015 Owner's Manual

OTHER CONTROLS AND EQUIPMENT
(if equipped)
®
The word mark and logo are registered
trademarks and are owned by the SIG,
Ink.
®
Stop using this unit and a
device whenever requested.
This unit shares the communication fre-
quency with other private or public wireless
communication equipment such as a wire-
less LAN and other wireless communica-
tion radios.
You should stop using this unit whenever
you are notified that your unit disturbs
other wireless communication immediately.

Basic Operations

(3)
RPT AS
RDM
DISP AM FM
PUSH SOUND PWR
TUNE/FLD PUSH
(2)
1 1
(1) VOL PUSH POWER knob
(2) TUNE FOLDER PUSH SOUND knob
(3) MUTE button
5-13
Turning power on/off
Press the VOL PUSH POWER knob (1).
The unit starts in the function mode it was
in when the power was turned off last.
Adjusting the volume
ready
Turn the VOL PUSH POWER knob (1).
Turning it clockwise increases the volume;
turning it counterclockwise decreases the
volume.
NOTE:
While driving, adjust the volume to an
extent that sound and/or noise coming
from outside the vehicle can be heard.
Mute
Press the MUTE button (3) to mute the
sound. To cancel the mute, press the
MUTE button (3) again.
®
Mic (1) (if equipped)
(1)

Adjusting bass/treble/balance /fader

1) Press the TUNE FOLDER PUSH
SOUND knob (2).
Each time the knob is pressed, sound
adjustment will change as follows:
Preset-EQ (EQ OFF)
Bass adjustment (BASS 0)
Treble adjustment (TREBLE 0)
Balance adjustment (BALANCE 0)
Fader adjustment (FADER 0)
AVC adjustment (AVC LEVEL 2)
2) Turn the TUNE FOLDER
SOUND knob (2) to adjust the sound.
1
PUSH
74LH0-74E