Table of Contents
Advertisement
Driver's Seat Belt Reminder Light
When the driver doesn't buckle his or her
seat belt, this light will come on and/or
blink.
For details about the seat belt reminder,
refer to "Seat Belts and Child Restraint
Systems" in this section.
"AIR BAG" Light (if equipped)
This light blinks or comes on for several sec-
onds when the ignition switch is turned to
the "ON" position or the engine switch is
pressed to change the ignition mode to "ON"
so you can check if the light is working.
The light will come on and stay on if there is
a problem in the air bag system or the seat
belt pretensioner system (if equipped).
WARNING
If the "AIR BAG" light does not blink
or come on briefly when the ignition
switch is turned to the "ON" position
or the engine switch is pressed to
change the ignition mode to "ON",
60G049
stays on for more than 10 seconds,
or comes on while driving, the air bag
system or the seat belt pretensioner
system (if equipped) may not work
properly.
Have
both
inspected by an authorized MARUTI
SUZUKI dealer.
Malfunction Indicator Light
63J030
Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
panel to indicate when it is necessary to
have the emission control system serviced.
The malfunction indicator light comes on
when the ignition switch is turned to the
"ON" position or the engine switch is
pressed to change the ignition mode to
"ON" to let you know the light is working
and goes out when the engine is started.
BEFORE DRIVING
If the malfunction indicator light comes on
or blinks when the engine is running, there
is a damage in the emission control sys-
tem.
Take the vehicle to your MARUTI SUZUKI
dealer to have the damage fixed.
NOTICE
Continuing to drive the vehicle when
the malfunction indicator light is on
or blinking can cause permanent
systems
damage to the vehicle's emission
control system, and can affect fuel
economy and driveability.
Transaxle Warning Light
(if equipped)
65D530
This light comes on for several seconds
when the ignition switch is turned to the
"ON" position or the engine switch is
pressed to change the ignition mode to
"ON" so you can check the light is working.
If this light comes on when the engine is
running, there is a problem with the
transaxle system. Ask your MARUTI
80J219
2-48
74LH0-74E
Advertisement
Table of Contents
