Table of Contents
Advertisement
OTHER CONTROLS AND EQUIPMENT
• /Telephone setup mode can be entered
only during vehicle is stationary speed
less than ~ 8 kmph)
®
1) Press the
setup button (4).
®
The
setup menu will be displayed.
2) Turn
the
TUNE
FOLDER
PUSH
SOUND knob (1) to select "Setup ", and
press the knob (1) to determine the
selection.
3) Turn
the
TUNE
FOLDER
PUSH
SOUND knob (1) to select "Pairing",
and press the knob (1) to determine the
selection.
®
4) Select "CAR AUDIO" from the
of the phone and establish the pairing.
Refer to the manual of the phone in use
for further information.
5) Enter the Passkey displayed on the unit
to the phone.
6) Press the On Hook button (6).
NOTE:
• When selecting "Go Back", the previous
menu will be displayed.
• When additionally registering a phone,
operate the same step from 1).
Receiving a call
Press the Off Hook button (5) to receive a
call.
Ending a call
Press the On Hook button (6) to end a call.
Rejecting a call (only for supported
models)
5-25
Press the On Hook button (6) to reject a
incoming call.
Adjusting the listening volume
• Turn the VOL PUSH POWER knob (2)
during a call.
Turning it clockwise increases the vol-
ume;
turning
it
counterclockwise
decreases the volume.
• Press the VOL switch (7) during a call.
Pressing "+" of the switch increases the
volume, pressing "-" of the switch
decreases the volume.
Adjusting the ring volume
menu
• Turn the VOL PUSH POWER knob (2)
while a call coming in.
Turning it clockwise increases the vol-
ume;
turning
it
counterclockwise
decreases the volume.
• Press the VOL switch (7) during a call.
Pressing "+" of the switch increases the
volume, pressing "-" of the switch
decreases the volume.
Adjusting the call or ringtone volume
Follow the instructions below to adjust the
call or ringtone volume.
®
1) Press the
setup button (4).
®
The
setup menu will be displayed.
2) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Setup Tele-
phone", and press the knob (1) to deter-
mine the selection.
3) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Sound Set-
ting", and press the knob (1) to deter-
mine the selection.
4) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Call Vol-
ume" or "Ringtone Volume", and press
the knob (1) to determine the selection.
The current call or ringtone volume will
be displayed.
5) Turn
the
TUNE
FOLDER
SOUND knob (1) to select desired call
or ringtone volume, and press the knob
(1) to determine the selection.
NOTE:
When selecting "Go Back", the previous
menu will be displayed.
Selecting the Ringtone
Follow the instructions below to select a
ringtone.
®
1) Press the
setup button (4).
®
The
setup menu will be displayed.
2) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Setup Tele-
phone", and press the knob (1) to deter-
mine the selection.
3) Turn
the
TUNE
FOLDER
SOUND knob (1) to select "Sound Set-
ting", and press the knob (1) to deter-
mine the selection.
PUSH
4) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select "Ringtone", and press
the knob (1) to determine the selection.
The current ringtone will be sounded.
PUSH
5) Turn the TUNE FOLDER PUSH SOUND
knob (1) to select desired ringtone, and
PUSH
PUSH
PUSH
PUSH
74LH0-74E
Advertisement
Table of Contents
