Completing The Installation - EFI Fiery proServer Installation Manual

Completing the installation

To complete the installation of the Fiery proServer, do the following:
• Save a backup of the Fiery proServer system to a USB drive, network share, or external
hard disk drive.
The system backup enables you to restore the system to an earlier state in case of a
problem. The backup procedure may take up to one hour, depending on the backup
medium used and the volume of job data. It is recommended that you save backups at
regular intervals.
For more information, see the User Guide.
• (Optional) Save a backup of the Fiery XF license file to a network share or removable
media drive. The license file is located in c:\Program Files (x86)\FlexLM on the Fiery
proServer.
The backup license file enables the IT administrator to reactivate the Fiery XF license after
restoring the Fiery proServer system to its factory state.
• Store the Entitlement Access Code (EAC) and all media shipped with the Fiery proServer
in a safe location, accessible to service personnel in case of a future service call.
• Configure the connection to the printer, as described in the Quick Start Guide.
6