Then place the whole filter in the bottle balcony and
lock it following the sequence in Fig 8 .
a
Fig 8
FILLING AND FILTERING WATER
Remove the cap and pour water into the funnel
9): the water fill will be filtered and will fill the water
tank .
You can fill up to 3 litres . Don't overfill water (the max
water level is indicated on the tank) .
Note: fill water only in the tank. Do not insert juice, coke or other
drink because they can damage the filter and the dispenser
functionality.
Fig 9
16
b
c
(Fig .
DISPENSING WATER
To dispense water press the paddle with a glass
10)
and release the paddle to stop dispensing .
Fig 10
Note: possible black dots in the filtered water or in filter area are
normal and not dangerous, they are due the normal carbon filter
functionality.
DISPENSER CHILD LOCK:
dispenser's paddle to avoid children dispensing water
(flip the small lever behind the paddle as shown in
(Fig . 11)
REPLACING THE CARBON CARTRIDGE
The carbon filter lasts max 2 months for continuous
use (up to 225 lt) .
The filter indicator on the control panel (if
available, see Fig . 1 2, b ) tells you when it's time to
change the cartridge: when the filter is in regular
status the indicator is off . When the filter is expired
the indicator lit on and is blinking .
(For models without filter indicator on control panel
please check the Month of installation - visible in the
filter housing window) .
a
Filter reset
button
Fig 12
To replace the carbon cartridge:
-
unlock the filter and remove it from the balcony;
-
remove the funnel from filter housing rotating it
anticlockwise;
-
remove the old carbon cartridge and insert the new
one after activated, with current month faced in the
window) .
(You can follow the procedure described in Carbon
filter activation and Filter installation -
7,
8) .
"Once replaced, Reset the carbon filter
Reset button ( see Fig . 1 2 a) keeping it pressed for 3
seconds . "
(Fig .
Fig 11
You can lock the
Filter indicator
b
Fig . 3, 4, 5, 6,
by the Filter