Daily Use - Whirlpool BSNF 8451 OX AQUA Use And Care And Installation Manual

DAILY USE

HOW TO INCREASE FREEZER STORAGE CAPACITY
• Do not block the air outlet area (on the back wall
and on the bottom inside the product) with food
products .
• All shelves and pull-out baskets are removable .
REMOVING THE FREEZER DRAWER CONTAINER
• Open the freezer door
• Pull the upper container upwards by the right and
left corners (1)
• Remove the drawer (2)
FUNCTIONS
ON/STANDBY
SMART DISPLAY
12
This function turns On/Stand-by the
refrigerator . To put the product in
press & hold the On/Stand-
Stand-by,
by button for 3 seconds .
All the indicators turn off except On/
Stand-by icon back light to indicate that
the appliance is in Stand-by .
This optional function can be used
to save energy . Please follow the
instructions contained in the Daily
Reference Guide to activate/ deactivate
the function .
After activation of the Smart Display,
the display goes off, except the 6th
Sense Fresh Control indicator . If
Smart Display is active – to adjust the
temperature or use other functions, it
is necessary to activate the display by
pressing any button .
After about 15 seconds without
performing any action, the display
goes off again and only the Pro Fresh
indicator remains visible .
When function is deactivated the
normal display is restored .
• removing the baskets to allow the storage of big
products .
• placing the food products directly on the freezer
shelves .
• removing additional removable accessories .
• The internal temperatures of the appliance may be
affected by the ambient temperature, frequency of
door opening, as well as location of the appliance .
Temperature setting should take into consideration
these factors .
• Unless otherwise specified the appliance accessories
are not dishwasher safe .
1
• Install the upper container in the reverse order
When the appliance is in Stand-
by, the light inside the refrigerator
compartment does not work .
Remember that this operation does
not disconnect the appliance from the
power supply .
To switch the appliance On again,
simply press and hold for 3 seconds the
On/Stand-By button .
The Smart Display is automatically
disabled after
a power failure . Remember that this
function does not disconnect the
appliance from the power supply, but
only reduces the power consumed by
external display .
Note: The declared appliance energy
consumption refers to operation with the
Smart Display function activated.
2