Page 2
I designed the Momentum phonostage. I knew when I began work on the Momentum phonostage that I couldn’t change the fundamentals. Those classic analog phono preamps—many of which I designed—have a natural, musical sound we all love.
If you need to return the phonostage for service 1 power regulator base If you should need to return the Momentum phonostage for service, be sure to use the original 1 AC power cord encased in protective static cling vinyl box and materials for shipment.
FRONT PANEL MC1 input loading display and buttons Input selector MC2 input loading display and buttons Gain display and buttons MM1 input loading display and buttons MM capacitance display and buttons MM2 input loading display and buttons EQ curve selector REAR PANEL Single-Ended/Balanced (RCA/XLR) switch Phonostage DC input...
Connect a ground cable from each turntable or tonearm to the white binding post on the rear of The Momentum phonostage is designed to be left on all the time, so it is always warmed up and the phonostage. Many purpose-built phono cables include a ground cable. If your cables do not, will always deliver maximum performance.
Like a piece of fine furniture, the Momentum phonostage has a fine, highly polished finish that can be easily damaged. Do not rub or polish the finish, and do not allow objects to come in contact Make sure you have the correct input selected on the phonostage.
Page 8
Tonal balance of record sounds wrong and amp and between the amp and the speakers.) Turn off your preamp or integrated amp, then check the connections between the turntable or tonearm and the phonostage, If the record you’re playing doesn’t sound the way you expect it to—i.e., there’s too much or too and between the phonostage and the preamp or integrated amp.
Page 9
If one step eliminates or Dan D’Agostino Master Audio Systems warrants the Momentum phonostage against manufacturing adequately reduces the hum or noise, you can ignore the other steps.
Page 10
MOMENTUM PHONOSTAGE S P E C I F I C A T I O N S Frequency response 20 Hz to 100 kHz, ±1 dB <0.003%, 20 Hz to 20 kHz Distortion Signal-to-noise ratio -75 dB, standard reference, unweighted ±...
Need help?
Do you have a question about the MOMENTUM and is the answer not in the manual?
Questions and answers