Page 2
Thank you very much for purchasing the Momentum HD Preamplifier. The Momentum HD shares its name with the original Momentum Preamplifier, but that is about all it shares. The new Momentum HD Preamplifier is a very special component, incorporating advancements in the power supply, audio circuitry, and control sections to make it the very finest preamplifier I have ever designed.
Now place the power supply in the place where you want to install the Momentum HD Preamplifier. Use two people to turn the WARNING: Do not expose this preamplifier to moisture or excessive humidity, and do not preamplifier back over again.
Bluetooth antenna Right-channel XLR output jacks Right-channel XLR input jacks Preamp DC input REMOTE CONTROL The remote control provided with the Momentum preamplifier offers the following functions: Server input selector Balance button Radio input selector DAC input selector Phase button...
AC plug at the other end. You may use to connect left channel to left channel, right channel to right channel. a different power cord with the Momentum if you wish, as long as it is tipped with a 15-amp IEC connector and a three-conductor AC plug.
To return the balance to the center, hold down the Balance button on the remote for 2 seconds. Gain adjustment: The Momentum HD Preamplifier can be set for +13 dB or +19 dB gain. The extra The meter backlight will flash to indicate the reset, and the needle will return to center.
Like a piece of fine furniture, the Momentum HD Preamplifier has a fine, highly polished finish of the cable to ensure there has been no damage to it.
Page 9
Dan D’Agostino Master Audio Systems, LLC warrants the Momentum HD Preamplifier against If you are using monoblock amplifiers, such as the Momentum M400 amplifier, make manufacturing defects and defects in materials for five years from the date of purchase or six sure both amplifiers are turned on.
Page 10
S P E C I F I C A T I O N S 0.1 Hz to 1 MHz, -1 dB / 20Hz to 20 kHz, ±0 dB Frequency Response Distortion (Full output) <0.006%, 20 Hz to 20 kHz -105 dB, unweighted Signal-to-Noise Ratio Gain +13 dB or +19 dB, switchable...
Need help?
Do you have a question about the MOMENTUM and is the answer not in the manual?
Questions and answers