Safety Instructions - Emerson ACF552ORB00 Owner's Manual

WARNING To avoid fire, shock, and serious personal injury, follow these instructions.
1. Read your owner's manual carefully and keep it for future reference.
2. Before servicing or cleaning unit, switch power off at fuse box and lock to prevent power from being switched
on accidentally. When the fuse box cannot be locked, securely fasten a warning device, such as a tag, to the
fuse box.
3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to
the ceiling fan before servicing.
4. Do not put anything into the fan blades while they are turning.
5. Do not operate reversing switch until fan blades have come to a complete stop.
1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan
without blades.
2. All wiring must be in accordance with AS/NZS 3000 "The Wiring Rules". The ceiling fan must be grounded as a
precaution against possible electrical shock. Electrical installation should be made or approved by a licensed
electrician.
3. The ceiling fan hanger bracket must be securely mounted and capable of reliably supporting at least 40kg.
4. The downrod furnished with the fan provides the minimum recommended floor to fan blade clearance for a
2.4 m ceiling.
5. The fan must be mounted with the fan blades at least 2.1 meters from the floor to prevent accidental contact
with the fan blades.
6. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
NOTE: This fan is not suitable for use with solid-state speed controls.
WARNING: This product is designed to use only those parts supplied with this product and/or any accessories
designated specifically for use with this product by My Fan Pty Ltd. Substitution of parts or accessories not
designated for use with this product by My Fan Pty Ltd. could result in personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
WARNING: This product is suitable for use in wet locations when installed with approved protection on electrical
circuits.
WARNING: This fan MUST be installed with an easily accessible isolating device to disconnect all poles of the
fan from the main supply.
WARNING

Safety Instructions

Additional Safety Instructions for Installation
MUST BE INSTALLED
DIY
BY A LICENSED
ELECTRICIAN
2
Model No.: ACF552