Instructions For Use - InMotion SCV H1 Instruction Manual

Hoverboard
Table of Contents

Advertisement

Available languages

Available languages

10. INMOTION H1 can be used in light rain for a short period of time, but please do not submerge in the water or use in the rain for
a long time.

5. Instructions for Use

Please correctly operate the product according to relevant instructions.
1. Start: Put INMOTION H1 on the ground, switch on power, and then power indicator lamp will be on and buzzer will give one
"beep" warning tone. Put both feet on foot rest and keep balance, then the car can move forward.
Note: After start, do not lift up the car and make tires get off the ground, otherwise, buzzer will give alarm due to intelligent
protection.
2. Get on the car: Put one foot rest and the other foot on the other foot rest.
3. Ride: If you feel it is not easy to keep the balance, you can use some auxiliary measures to get familiar with the balance sense at
first. You can use wall, guardrail or people's strength to gradually get familiar with the balance sense and try to make the car move
forward by leaning the body forward. When you get familiar and gradually master the balance, you can reduce your dependency on
auxiliary till you separate yourself from the auxiliary get self- balance.
4. When the center of body weight leans forward, the car will drive forward; when the center of body weight keeps upright, the car
will reduce the speed till stop; when center of the body weight leans backward, the car might accelerate the speed, so please pay
attention to your own safety to avoid safety risk.
18

Advertisement

Table of Contents
loading

Table of Contents