Parameters Description
Parameter
Enable NAT
Fullcone
WAN Port
LAN port
LAN IP address
Protocol
Enable mapping
WAN Connection
List
Add Button
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
Check to enable the NAT Fullcone. Or the symmetric cone
NAT is enabled.
Input WAN side port range used by port forwarding
Input LAN port used by port forwarding
Input LAN side IP address
Select the protocol for port forwarding
TCP
UDP
All
Enables or disables mapping between WAN port and LAN port
Select which WAN link to use port forwarding setup
Create a new mapping rule using above port forwarding setup
© Calix. All Rights Reserved.
Description
43