Calix T072G Operation And Maintenance Manual page 25

Parameter Description
Parameter
Enable
Mode
Channel
Transmitting power
Wi-Fi MAC Filter
SSID Select
SSID Name
Enable SSID
SSID Broadcast
SSID Isolate
Enable WPS
WPS Mode
PIN Code Number
WPS Connect Button
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
Enables wireless network.
Select working mode, including the following modes: Auto
(b/g/n), n, b/g, b and g.
By default, the channel is selected automatically.
Select the transmitting power, including the following modes:
100%, 75%, 50% and 25%
Enables or Disables Wi-Fi MAC Filtering.
Select the SSID to be configured.
Configure SSID name.
Enables or Disables this SSID.
Enables or Disables Broadcast. Disable SSID broadcast will
cause the terminal can not use passive scan to get the SSID.
Enables or Disables SSID Isolate. Enable Isolate will cause
the PC connecting to its AP cannot be ping.
Enables wireless protected setup function. Disable this
function will cause PC and AP cannot match codes.
Includes two modes: PBC and PIN. PBC is as known as one
key encryption mode. There is no need to input the PIN
code with PBC mode. In the PIN mode, it is needed to input
the PIN code. The two modes need the support from
wireless applications on user's wireless adapters.
When PIN mode is selected as WPS mode, it needs to input
the PIN code generated by user's wireless card application.
Enables WPS interaction. This can also be done by the WPS
button on ONT hardware.
© Calix. All Rights Reserved.
Description
25