Calix T072G Operation And Maintenance Manual page 35

Parameter
Destination IP Address
Destination Netmask
Protocol
Destination Start Port
Destination End Port
DSCP Remark
Add Button
Delete Button
Save Button
Refresh Button
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
Input the destination IP address.
Input the destination Netmask.
Includes three protocols: TCP, UDP and ICMP. In
the TCP and UDP protocols, it is needed to input
the Destination Start Port and Destination End
Port.
Input the destination start port number
Input the destination end port number
New DSCP value.
Add this entry into the DSCP Remark table.
Delete the MAC to IP binding rule in the local
gateway tables.
Save the configuration.
Clear the configuration without being saved.
© Calix. All Rights Reserved.
Description
35