Web Gui Access Through Lan Ports - Calix T072G Operation And Maintenance Manual

12

Web GUI Access Through LAN Ports

Before accessing ONT, make sure that PC properly connects to the ONT. Then, do the
following configurations and operations:
1. Connect PC LAN port and ONT LAN1 port with a standard Ethernet Cable
2. Configure IP address of PC through one of the following ways: Configure IP address,
mask, and gateway address. For example:
 Obtain an IP address automatically. In this case, the PC will obtain an IP address
from ONT through DHCP
 Configure static IP address for PC
 IP address: 192.168.1.X (2-254)
 Mask: 255.255.255.0
 Gateway address: 192.168.1.1
Note: Make the configurations based on actual ONT versions.
3. Ping the ONT IP address (Default is 192.168.1.1).
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.