40
The following table describes the parameters.
Parameter Description
Parameter
Enable IP Filter
Mode
Source Start IP Address
Source End IP Address
Destination Start IP
Address
Destination End IP
Address
Protocol
Add Button
After the configurations are done, click Save button to save it.
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
Enables or disables IP filter function.
Includes two mode: Drop or Accept. Drop means blocking
the IP flows that meet the rule. Accept means allowing the
IP flows that meet the rule.
Setup the source IP start address.
Setup the source IP end address.
Setup the destination IP start address.
Setup the destination IP end address.
Select the protocols, including the following options:
ALL: all protocols
TCP
UDP
TCP/UDP
ICMP
Click this button, to add a new filtering rule for above
configurations.
© Calix. All Rights Reserved.
Description