Calix T072G Operation And Maintenance Manual page 23

The following table describes the parameters.
Parameter Description
Parameter
WAN
Connection List
Delete
Enable/Disable
NAT
Service
Enable VLAN
VLAN ID
VLAN PRI
WAN IP
Version
WAN IP Mode
After the configurations are done, click Save button to save it.
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
By default there is a TR-069 connection. Another option is to create
a new WAN connection.
Select this check box to delete this WAN connection.
Enables or disables this WAN connection.
Enables or disables the NAT function.
Includes four service types: VOIP, TR-069, Internet, and IPTV.
Select this check box to enable VLAN feature on WAN port. When
selected, the below VLAN ID setup, and 802.1p priority setup will
be configurable. Otherwise they can not be configured.
Setup VLAN ID of WAN.
IEEE 802.1p Priority of WAN.
Includes three options: IPV4, IPV6, and IPV4+IPV6. If IPV4 is
selected, it will be requested to enable/disable OPTION 60 Enable
and input Vendor Class ID. If IPV6 is selected, it will be requested
to select IPV6 Address/Prefix.
Used to select the method to get the WAN IP address. There are
three options: PPPoE, DHCP, and Static IP. If PPPoE is selected, it
will be requested to input username/password, and keep alive time.
If Static IP is selected, it will be requested to input the IP address,
netmask, gateway, Primary DNS and Second DNS address.
© Calix. All Rights Reserved.
Description
23