ZC Can Construction
Construct the zc can as shown below.
WARNING: The sheet metal edges are sharp. Use gloves when handling the zc can.
Knock-out for top
vent applications
Bend the top stand-off as
shown and secure it to the zc
can with the included screws.
Bend the mounting flange as shown.
Page 6 of 8
ZC Kit – Large Pellet Insert
(99200149)
Rear Vent Shield (not required for top-vent applications)
A knock-out is provided on the rear panel
for rear vent applications.
10/9/06
Use the included screws to
secure the zc can sides and
top to the zc can rear panel.
© Travis Industries, Inc.