Driver And Utility Installation With Windows - cable matters 202043 User Manual

3.3 Driver and Utility Installation with Windows

1) Install the driver software by clicking the Setup.exe application file
Driver can be downloaded from www.cablematters.com/downloads
DO NOT plug in the adapter until the software has finished installing, unless prompted
If the application will not run, copy the contents to the desktop and rename the folder
2) The installation wizard provides the choice of installing the Windows drivers and MediaTek utility OR only the driver
Install BOTH the drive and the utility for access to the most configuration options
The utility is required to configure some security and profile settings in XP and older versions of Windows 7
3) Restart your computer when prompted
4) Plug in the Wireless AC600 Adapter after the computer is restarted
Your computer should detect the adapter and the green LED should blink
The adapter is now ready to be connected to a Wi-Fi network
If you receive an error, check Section 4 -TROUBLESHOOTING on page 10
The adapter should be connected and the green LED should light
www.cablematters.com
Wireless AC600 Dual-Band USB Adapter
4