Dsc Operation - Icom IC-M506 Instruction Manual

7

DSC OPERATION

r
After making the individual DSC call, the transponder will
display "DSC Transmission COMPLETED."
tered the voice channel selection screen in step w.
ment is received.
Transponder's display
Step 2: Transceiver's operation
t
When the acknowledgement is received, beeps sound.
If the acknowledgement 'Able to comply' is received,
push [ALARM OFF] to stop the beeps, and then select
the intership channel specified in step w.
called cannot use the channel.
of the AIS target on the display.
If the acknowledgement 'Unable to comply' is received,
push [ALARM OFF] to stop the beeps, and then return
to the operating channel before you entered the MENU
screen.
73
-
-
Transceiver's display
'Able to comply' is received
'Unable to comply' is received
y After the communication is finished, push [EXIT] to return
to the normal operating mode.
TRANSPONDER
[Y]
[Z]
[CLEAR]
[DSC]