Icom IC-M506 Instruction Manual page 79

D DSC Data Output
Select an option for the DSC Data Output function.
When receiving a DSC call, this function makes the trans-
ceiver send the DSC data from its NMEA Output port to a
connected device.
q Enter "DSC DATA OUTPUT" in the DSC Settings menu.
MENU DSC SET
(Push [MENU]) (Select icon)
w Rotate Dial to set the DSC Data Output function to "All Sta-
tion," "List Station" or "OFF," then push [ENT].
All Station : Outputs the call from any vessel from the
NMEA Output port.
List Station : Outputs the call from any vessels listed on the
Individual ID screen.
OFF : Does not output any call to the external equip-
ment.
e
Push [EXIT] to return to the normal operating mode.
DSC Data Output
(Rotate Dial, then push [ENT].)
(default)
D Alarm
Set the Alarm function ON or OFF, depending on the Cat-
egory or Status.
q Enter "ALARM" in the DSC Settings menu.
MENU DSC SET
(Push [MENU]) (Select icon)
w Rotate Dial to select the status, then push [ENT].
selectable. (default: ON)
e
Rotate Dial to set the Alarm setting to "ON" or "OFF."
r
Push [EXIT] to return to the normal operating mode.
7
DSC OPERATION
Alarm
(Rotate Dial, then push [ENT].)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
70