How To Change The Extruder - Geeetech GiantArm D200 User Manual

Click ‗ok' and ‗Close' on the windows to complete the firmware upgrade.

8.3 How to change the extruder

The extruder of GiantArm D200 is characterized by its modular design. Specifically speaking, the coldend
and hotend are combined together by a sliding joint, making it easy to change the extruder.
1) Find the switch on the left of the nozzle and slide it to the left slowly to take out the nozzle;
Here is the picture after you move the nozzle.
94