RCA DWG855 User Manual page 55

Chapter 2: Web Configuration
Fig. 38 WPS Setup AP/PUSH
And WPS Configure Status will be "In progress", after establishing the connection the WPS Configure
Status will be "Success!". If you select WPS Method to PIN then It will ask for PIN while configuring the
WiFi AP by showing a text box so, you need to enter that PIN to establish the connection. You can get the
PIN from client.
Fig. 39 WPS/Push-Button
PIN: Use this option to set the PIN, enter 4-8 digits PIN of the device you wish to configure. After entering
the pin click "Add" button, then the WPS Setup AP page will appear as shown below and the status will be
"In progress", after establishing the connection the WPS Configure Status will be "Success!".
Fig. 40 WPS Setup AP/PIN
52
Illustrations contained in this document are for representation only.