Activating The Residential Voice Gateway - RCA DWG855 User Manual

Chapter 1: Connections and Setup

Activating the Residential Voice Gateway

After installing the Residential Voice Gateway and turn it on for the first time (and each time the modem
is reconnected to the power), it goes through several steps before it can be used. Each of these steps is
represented by a different pattern of flashing lights on the front of the modem.
Note: All indicators flash once before the initialization sequence.
If all of the lights are flashing sequentially, it means the Residential Voice Gateway is automatically
updating its system software. Please wait for the lights to stop flashing. You cannot use your modem
during this time. Do not remove the power supply or reset the Residential Voice Gateway during this
process.
For a better wireless reception/connectivity, please make sure the supplied Wireless antenna is connected
to the back of the unit.
17
Illustrations contained in this document are for representation only.