<Disassembly Procedures>
Interface Cover Removal
⑴ Remove two screws in the upper portion and one at the bottom of the Interface Cover.
⑵ Remove one screw from the back cover side, lift the back cover slightly as shown and
remove the Interface Cover.
Fig. 023 Interface Cover Removal 1
Back Cover Removal
⑴ Remove three screws from the back and one from the bottom edge.
⑵ Disconnect two flexes and remove the Back Cover.
・Don t tear the flexes.
CAUTION
1
・Connectors cannot be inserted diagonally.
Fig. 025 Back Cover Removal 1
Front Cover Removal
⑴ Remove seven screws (Upper front 2
screws, Below the mount 1, Grip side 1,
Grip front 1, Bottom 1)
②
Fig. 024 Interface Cover Removal 2
TFT Flex
Fig. 026 Back Cover Removal 2
Fig. 027 Front Cover Removal
11
Repair Information
①
BACK Dial Flex