Imaging Unit Removal - Canon EOS 5D Service Manual

Imaging Unit Removal

⑴ Remove four screws and remove the Imaging Unit.
Washers may fall off at this point. Be careful not to loose them.
⑵ With the washers in place, temporarily fix the unit with three screws.
・ When working on the Imaging
CAUTION 2
Unit, always wear a grounded
wrist strap.
・ Be very careful not to scratch
or soil the Imaging unit.
⑶ Remove two screws from the Imaging Unit and remove the Image Sensor Shield Holder.
⑷ Remove two screws and slowly remove the Low Pass Filter Ass'y. It is fixed with double-
sided tape.
The filter is fixed with double-sided tape. Take great care not to damage it
CAUTION 3
when it is removed.
Fig. 050 Imaging Unit Removal 2
Fig. 049 Imaging Unit Removal 1
Fig. 051 Imaging Unit Removal 3
19
Repair Information