<Disassembly Procedures>
Baseplate Removal
⑴ Remove four screws and remove the Baseplate.
Auto Focus FPC Ass'y Removal
⑴ Remove flex at one point.
⑵ Unsolder the green lead. Lift the flex out of the
way and unsolder the beeper at two points.
⑶ Remove two screws, and remove the Auto Focus
FPC Ass'y.
When unsoldering the beeper, be careful to not melt it.
CAUTION
1
×
Eyepiece Cover Removal
⑴ Remove two screws, and remove the Eyepiece
Unit.
NG
22
Repair Information
Fig. 055 Baseplate Removal
Fig. 056 Auto Focus FPC Ass'y Removal 1
○
OK
Fig. 057 Eyepiece Cover Removal