<Disassembly Procedure>
Digital PCB Shield Cover Removal
⑴ Unsolder at four points and remove the shield cover.
When soldering, be careful not
CAUTION
1
the short the PCB (D) shield to
the other shield.
Digital PCB Ass y Removal
⑴ Disconnect five flexes and one cable connections.
⑵ Remove four screws from the top of the PCB and one from the side. Remove the D PCB.
⑶ Unsolder one connection and remove the USB Lag Plate from the Digital PCB Ass y.
Fig. 046 Digital PCB Ass y Removal 1
Camera PCB Ass y Removal
⑴ Disconnect four flex connections.
⑵ Remove three screws and remove the
Camera PCB.
Fig. 045 Digital PCB Shield Cover Removal
Fig. 047 Digital PCB Ass y Removal 2
Fig. 048 Camera PCB Ass y Removal
18
Repair Information
Don't short here!