Canon EOS 5D Service Manual page 28

Hide thumbs Also See for EOS 5D:
Table of Contents

Advertisement

7-6
AF point display:
7-7
AF activation:
7-8
AF operation speed:
7-9
Focus confirmation:
7-10
AF precision:
7-11
AF working range:
7-12
AF-assist beam:
8.Exposure Control
8-1
Type:
8-2
Exposure modes:
⑷ With C.Fn-13-1, the Multi-controller can select the AF point
directly. With C.Fn-13-2, the Quick Control Dial can select
the AF point directly (without needing to press the AF point
selector).
Indicated by superimposed display in the viewfinder and on
the LCD panel.
AF is activated by pressing the shutter button halfway (SW-1)
Same as the EOS 20D.
Indicated by superimposed display in viewfinder (can be
disabled with Custom Function), focus confirmation light, and
beeper (can be disabled with the power switch).
⑴ When the AI Focus AF mode's AI SERVO AF is set, the beeper
sounds.
⑵ In the AI SERVO AF mode, the beeper does not sound.
⑶ No focus confirmation indicator in the AI SERVO AF mode.
⑷ The focus confirmation beeper can be enabled or disabled
with the menu's [Beep].
⑸ The superimposed display can be enabled/disabled with
C.Fn-10.
Same as the EOS 20D
EV -0.5 -18 (at 20ºC and ISO 100, under Canon's testing
standards)
When an EOS-dedicated Speedlite is used (equipped with
AF-assist beam) and turned on, a near-infrared beam (peak
wavelength approx. 700 nm) is emitted automatically.
Max. aperture TTL metering with 35-zone SPC with the
following selectable modes:
⑴ Evaluative metering (linked to all AF points)
⑵ Partial metering (approx. 8% of viewfinder)
⑶ Spot metering (approx. 3.5% of viewfinder)
・ During continuous shooting, spot metering is repeated for
each shot.
⑷ Centerweighted average metering
・ In the Full Auto mode, evaluative metering is set
automatically.
・ AF point-linked partial metering and spot metering are not
possible.
1) Program AE (shiftable)
2) Shutter-priority AE
・ With C.Fn-16-1, safety shift is applied to 1) or 2).
3) Aperture-priority AE
4) Full Auto (non-shiftable)
5) E-TTL II autoflash program AE
・ C.Fn-14-0: Evaluative metering, C.Fn-14-1: Averaged
metering
6) Manual exposure (including bulb)
23
General Information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents