Cisco 3G MicroCell User Manual page 5

IMPORTANT SAFETY INSTRUCTIONS
Power Source Warning
A label on this product indicates the correct power source for this product. Operate
this product only from an electrical outlet with the voltage and frequency indicated
on the product label. If you are uncertain of the type of power supply to your home
or business, consult your service provider or your local power company.
The AC inlet on the unit must remain accessible and operable at all times.
Ground the Product
WARNING: Avoid electric shock and fire hazard! If this product
connects to cable wiring, be sure the cable system is grounded (earthed).
Grounding provides some protection against voltage surges and built-up
static charges.
Protect the Product from Lightning
In addition to disconnecting the AC power from the wall outlet, disconnect the
signal inputs.
Verify the Power Source from the On/Off Power Light
When the on/off power light is not illuminated, the apparatus may still be
connected to the power source. The light may go out when the apparatus is turned
off, regardless of whether it is still plugged into an AC power source.
Eliminate AC Mains Overloads
WARNING: Avoid electric shock and fire hazard! Do not overload
AC mains, outlets, extension cords, or integral convenience receptacles.
For products that require battery power or other power sources to operate
them, refer to the operating instructions for those products.
Provide Ventilation and Select a Location
• Remove all packaging material before applying power to the product.
• Do not place this apparatus on a bed, sofa, rug, or similar surface.
• Do not place this apparatus on an unstable surface.
• Do not install this apparatus in an enclosure, such as a bookcase or rack, unless
the installation provides proper ventilation.
• Do not place entertainment devices (such as VCRs or DVDs), lamps, books,
vases with liquids, or other objects on top of this product.
• Do not block ventilation openings.
4030453_RevA_6.75x8.25_Mar6.indd 5 4030453_RevA_6.75x8.25_Mar6.indd 5
, continued
Protect from Exposure to Moisture and Foreign Objects
WARNING: Avoid electric shock and fire hazard! Do not expose this
product to dripping or splashing liquids, rain, or moisture. Objects filled with
liquids, such as vases, should not be placed on this apparatus.
WARNING: Avoid electric shock and fire hazard! Unplug this product
before cleaning. Do not use a liquid cleaner or an aerosol cleaner. Do not use
a magnetic/static cleaning device (dust remover) to clean this product.
WARNING: Avoid electric shock and fire hazard! Never push objects
through the openings in this product. Foreign objects can cause electrical
shorts that can result in electric shock or fire.
Service Warnings
WARNING: Avoid electric shock! Do not open the cover of this
product. Opening or removing the cover may expose you to dangerous
voltages. If you open the cover, your warranty will be void. This product
contains no user-serviceable parts.
WARNING: This device has anti-tampering technology. Attempts
to open the enclosure by unqualified personnel may render the device
inoperable.
Check Product Safety
Upon completion of any service or repairs to this product, the service technician
must perform safety checks to determine that this product is in proper operating
condition.
Protect the Product When Moving It
Always disconnect the power source when moving the apparatus or connecting
or disconnecting cables.
20081017_3G_Micro_Cell_Safety
5
3/6/2009 5:43:25 PM 3/6/2009 5:43:25 PM