ForaCare FORA D40 Owner's Manual page 56

Operating Problem
1. Blood Glucose Measurement
What happened?
The monitor does not display a message after inserting a test strip.
POSSIBLE CAUSE
Batteries exhausted.
Batteries incorrectly installed or
absent.
Test strip inserted upside down or
incompletely.
Defective monitor.
What happened?
The test does not start after applying the sample.
POSSIBLE CAUSE
Insufficient blood sample.
Defective test strip.
Sample was applied at a time when
" " was not flashing on the display.
Defective monitor.
What happened?
You turned off the monitor but it makes a beeping sound.
POSSIBLE CAUSE
The strip is still inside the slot.
56
WHAT TO DO
Replace the batteries.
Check to see if the batteries are
correctly installed.
Insert the test strip correctly with the
contact bars end first.
Please contact your local customer
service.
WHAT TO DO
Repeat the test with a new test strip
and a larger sample.
Repeat the test with a new test strip.
Repeat the test with a new test strip.
Apply sample only when " " appears
on the display.
Please contact your local customer
service.
WHAT TO DO
Remove the strip. If you need to test
blood glucose, insert an unused strip.
A1-56