ForaCare FORA D40 Owner's Manual page 30

Blood glucose plus blood pressure monitoring system

Table of Contents

STEP 3. Press M button and select the symbol "QC." When you do this, this

reading will be stored as a control solution data.

STEP 4. Obtain Control Solution

Shake the control solution vial well.

Remove the cap from the control

solution bottle. Place cap on flat

surface. Squeeze the vial, discard the

first drop, and wipe off the dispenser tip

to prevent contamination. Squeeze the

vial again to produce another drop and

place this drop on the top of cap.

STEP 5. Apply Control Solution.

While holding the monitor, move the absorbent hole of the test strip to touch

the drop of control solution. Then the drop will be automatically drawn into the

test strip. Make sure the confirmation window fills completely. The meter

begins counting down.

A1-30

Table of Contents

Show Quick Links

Table of Contents