Set Up Ipv6 Connection - TP-Link Archer C2600 User Manual

Set up IPv6 Connection

4.3
If your ISP provided also supports IPv6 connection and your ISP has provided some detailed IPv6 parameters, you can
configure the router to permit IPv6 connection.
1. Configure the WAN settings.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
Advanced > IPv6
1) Go to
2) In the Internet Connection Type list, select the IPv6 connection type. Your Internet service provider (ISP) can
provide this information.
3) Fill in information as required by different connection type. (Red blanks must be filled.)
Static IP：Fill in blanks and click Save.

page.
Chapter 4 Set Up Internet Connection17