Appendix C: Configure the PC
In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows 7. First make sure your
Ethernet Adapter is working, refer to the adapter's manual if needed.
1.
Install TCP/IP component
1)
On the Windows taskbar, Right-click Network icon
Change adapter settings.
2)
Right-click your wired network connection (Local Area Connection or Ethernet by default), and select
Properties.
3)
Double-click Internet Protocol Version 4 (TCP/IPv4).
Appendix C:
Configure the
PC83
, and select Open Network and Sharing Center >