TP-Link Archer C2600 User Manual page 35

You can customize the server name and use the name to access your USB disk.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
Advanced
2. Select >
3. Make sure Network Neighborhood
then click Save.
4. Now you can access the USB disk with
Folder Sharing
By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow
the steps below:
1. Visit http://tplinkwifi.net, then log in with the user name and password you set for the router.
Basic USB Settings
2. Select >
Share All, then click
3. Select the Volume Name
4. Decide the way you share the folder:
Enable Authentication:
username and password to access the USB disk. Refer to
USB Settings Sharing Access
>
is ticked, and enter a Network/Media Server Name as you like, such as MyShare,
\\MyShare (smb://MyShare
Sharing Access
>
Refresh to add a new sharing folder.
and Folder Path, then enter a
Tick to enable authentication for this folder sharing, and you will be required to use a
Chapter 6
.
for Mac).
. Focus on the Folder Sharing
Folder Name as you like.
To Set up Authentication for Data Security
USB Application25
section. Click the button to disable
to learn more.