TP-Link Archer C2600 User Manual page 91

Ac2600 wireless dual band gigabit router

Hide thumbs Also See for Archer C2600:

Table of Contents

1. Visit http://tplinkmodem.net, and log in with password you set for the router.

2. Configure the LAN IP address of the router in the same subnet as the root router. For example, the IP address of the

root router is 192.168.0.1, the IP address of the extended router should be from 192.168.0.2 to 192.168.0.254.).

Advanced

3. Go to

> Wireless >

section and select the check box to enable the WDS Bridging function.

4. Click

Survey

to scan all the AP devices and choose the root AP to be bridged.

5. Click the connect icon and then the SSID and MAC will be automatically filled in. Configure the Security settings as

the AP you choose to be bridged.

Wireless Settings

page and select the wireless network 5GHz. Locate the WDS (5GHz)

Appendix B:

Troubleshooting Guide &

FAQ81

Table of Contents

Need help?

Do you have a question about the Archer C2600 and is the answer not in the manual?